Polyurethane Colored Sand Floor Paint
YR-9(8)803-(07-10)
Brand:YongRong
Product origin:Guangdong, China
Delivery time:7-10days
Supply capacity:5Tons/day
Send Inquiry
Product Description
Guangdong Yongrong New Building Materials Co., Ltd.'s high-end colored sand floor paint uses epoxy/polyurethane resin combined with high-quality colored quartz sand as its core to create a seamless flooring solution that is highly wear-resistant, impact-resistant, chemically resistant, and highly decorative. It is environmentally friendly with low VOCs, offers a rich variety of customizable colors, and is widely applicable to industrial workshops, commercial spaces, and residential areas. Welcome to contact Yongrong for wholesale purchases or bulk supply of high-quality colored sand floor paint products.
Product Parameter
Product Feature
Yongrong Colored Sand Floor Coating is a high-performance flooring material made with epoxy resin or polyurethane resin as a base, adding colored quartz sand or resin particles and a curing agent. It combines decorative and functional properties. Forming a seamless whole through on-site paving or leveling processes, it is suitable for various scenarios including industrial, commercial, and residential applications. Below is a comprehensive overview of Yongrong Colored Sand Floor Coating:
Yongrong Colored Sand Floor Coating utilizes a two-component cross-linking curing technology, combining natural or synthetic colored sand aggregates to form a dense coating that is highly wear-resistant, impact-resistant, and chemically resistant. A single coat can achieve a film thickness of 3-6mm, effectively covering surface defects (such as cracks and sandblasting). Furthermore, the combination of colors and textures of the colored sand particles allows for personalized decorative effects. Flexible application processes are available, including pressed sand type (Y-type) and self-leveling type (SL-type), meeting the needs of different application scenarios.
1. High Abrasion Resistance: Hardness ≥ Shore D83 (pencil hardness 3H grade), abrasion loss ≤ 0.02g (750g/500 rpm, GB/T1768), suitable for industrial environments with frequent traffic such as forklifts and trolleys.
2. Chemical Resistance: Resistant to immersion in 10% sulfuric acid and 20% sodium hydroxide solutions for 72 hours, suitable for special locations such as chemical plants and laboratories.
3. Good Slip Resistance: Dry friction coefficient ≥ 0.50, wet friction coefficient ≥ 0.40 (GB/T4100-2015), effectively reducing the risk of slipping, suitable for damp environments (such as restrooms and around swimming pools).
4. Environmental Performance: VOC content ≤ 60g/L (GB18582-2020), certified by China Environmental Labeling, suitable for sensitive locations such as homes and schools.
5. Highly Decorative: The colored sand particles come in a variety of colors (such as beige, sesame gray, and sea gray), which can be freely combined to form patterns. The surface presents a natural stone texture, enhancing the overall quality of the space.
Yongrong Colored Sand Floor Coating is widely used in various scenarios, providing targeted, high-performance flooring solutions:
• Industrial Sector: Factory workshops, logistics warehouses, chemical plants (resistant to chemical corrosion), electronics factories (anti-static).
• Commercial Sector: Shopping malls, hotels, exhibition halls, parking lots (wear-resistant and slip-resistant).
• Residential Sector: Home garages, basements, terraces (environmentally friendly and easy to clean).
• Special Scenarios: Hospitals, schools (slip-resistant and environmentally friendly), food factories (oil-resistant).
Parameters | Indicators
Main Components | Epoxy Resin/Polyurethane Resin, Colored Quartz Sand/Resin Particles, Curing Agent
Drying Time | Surface Dry ≤ 4h (25℃), Complete Dry ≤ 24h
Tensile Strength | ≥ 2.0MPa (GB/T2567)
Compressive Strength | ≥ 70MPa (GB/T17671)
Hardness | ≥ Shore D83 (GB/T2411)
Impact Resistance | No cracks or peeling after a 1m free drop of a 1000g steel ball (GB/T1732)
Water Resistance | No blistering or peeling after 168h immersion (GB/T9274)
• Environmental Standard: GB18582-2020 "Limits of Hazardous Substances in Building Wall Coatings".
• Performance Standards: GB/T22374-2018 "Floor Coating Materials", JC/T2570-2020 "Colored Sand Flooring Materials".
• Safety Standards: HJ2537-2025 "Technical Requirements for Environmental Labeling Products - Architectural Coatings".
• Stamped Sand Type (Y-type): 3-5 kg/m² (thickness 3-6 mm).
• Self-Leveling Type (SL-type): 1.5-2.0 kg/m² (thickness 0.8-3 mm). Actual usage will be adjusted based on the flatness of the floor and the construction process.
VII. Color Selection
Standard Color Chart: Provides 30+ standard colors, including beige, sesame gray, sea gray, sky blue, etc. Customization Service: Supports computer color matching; special colors can be customized according to design requirements, color difference ΔE ≤ 2.0 (GB/T1766).
Two-component packaging: Main agent 20kg/barrel + Hardener 5kg/barrel (ratio 4:1). Single-component packaging: 20kg/barrel (Yongrong 20L blue, dark green, and black packaging barrels shown).
IX. Product Storage
Storage conditions: Cool, dry place, temperature 5-35℃, avoid direct sunlight. Shelf life: 12 months (solvent-based), 24 months (water-based) in unopened condition.
1. Substrate requirements: The ground should be flat, dry (moisture content ≤8%), free of hollow areas and oil stains, with a pH value ≤10.
2. Treatment steps:
○ Grind the ground to remove laitance and oil stains (using a dust-free grinder or shot blasting machine);
○ Repair potholes and cracks (using epoxy mortar or putty);
○ Apply a sealing primer (to enhance adhesion, dosage 0.1-0.2kg/㎡).
• Sand-pressed Type (Y-type): Sealing primer (0.1-0.2 kg/m²) + Epoxy mortar layer (1-2 mm, 1.5-3.0 kg/m²) + Colored sand layer (3-5 kg/m²) + Transparent topcoat (0.2-0.3 kg/m²).
• Self-leveling Type (SL-type): Sealing primer (0.1-0.2 kg/m²) + Epoxy self-leveling intermediate coat (0.8-1.2 kg/m²) + Colored sand self-leveling topcoat (1.5-2.0 kg/m²).
XII. Construction Guide (Usage Method)
1. Construction Tools: Trowel, defoaming roller, mixer, grinder, vacuum cleaner.
2. Construction Steps:
○ Mix the two-component products according to the specified ratio and use within 30 minutes after thorough mixing.
○ Sand-pressed type: Spread the Yongrong colored sand floor paint layer using a paver and compact it smoothly with a power trowel.
○ Self-leveling type: Spread it with a trowel and defoam with a defoaming roller.
○ Topcoat application: Apply a transparent topcoat by roller or spray to enhance wear resistance.
1. Construction Environment: Temperature 5-35℃, humidity ≤85%. Avoid construction in rainy weather or under direct sunlight.
2. Material Mixing: Strictly mix according to the specified ratio and stir thoroughly to avoid incomplete curing.
3. Finished Product Protection: After construction, allow for ventilation and drying. Do not allow heavy objects to roll over the product for 7 days.
XIV. Tools Used
• Essential Tools: Trowel, defoaming roller, mixer, grinder, vacuum cleaner, hygrometer, thermometer.
• Auxiliary Tools: Masking tape, measuring cup, steel tape measure, level.
1. Protective Measures: Wear masks, gloves, and goggles during construction, and ensure good ventilation; keep solvent-based products away from fire sources.
2. Waste Disposal: Residual paint and packaging containers should be properly recycled and not discarded indiscriminately.
3. Emergency Treatment: If splashed into eyes, immediately rinse with clean water and seek medical attention; wash skin with soap after contact.
Note: The performance and application data of Yongrong Colored Sand Floor Coating listed above were obtained under specific experimental conditions. However, actual application environments vary widely and are not subject to our constraints. If you have any questions, please contact Guangdong Yongrong New Building Materials Co., Ltd. We reserve the right to revise the product manual without further notice.
Yongrong Colored Sand Floor Coating utilizes a two-component cross-linking curing technology, combining natural or synthetic colored sand aggregates to form a dense coating that is highly wear-resistant, impact-resistant, and chemically resistant. A single coat can achieve a film thickness of 3-6mm, effectively covering surface defects (such as cracks and sandblasting). Furthermore, the combination of colors and textures of the colored sand particles allows for personalized decorative effects. Flexible application processes are available, including pressed sand type (Y-type) and self-leveling type (SL-type), meeting the needs of different application scenarios.
1. High Abrasion Resistance: Hardness ≥ Shore D83 (pencil hardness 3H grade), abrasion loss ≤ 0.02g (750g/500 rpm, GB/T1768), suitable for industrial environments with frequent traffic such as forklifts and trolleys.
2. Chemical Resistance: Resistant to immersion in 10% sulfuric acid and 20% sodium hydroxide solutions for 72 hours, suitable for special locations such as chemical plants and laboratories.
3. Good Slip Resistance: Dry friction coefficient ≥ 0.50, wet friction coefficient ≥ 0.40 (GB/T4100-2015), effectively reducing the risk of slipping, suitable for damp environments (such as restrooms and around swimming pools).
4. Environmental Performance: VOC content ≤ 60g/L (GB18582-2020), certified by China Environmental Labeling, suitable for sensitive locations such as homes and schools.
5. Highly Decorative: The colored sand particles come in a variety of colors (such as beige, sesame gray, and sea gray), which can be freely combined to form patterns. The surface presents a natural stone texture, enhancing the overall quality of the space.
Yongrong Colored Sand Floor Coating is widely used in various scenarios, providing targeted, high-performance flooring solutions:
• Industrial Sector: Factory workshops, logistics warehouses, chemical plants (resistant to chemical corrosion), electronics factories (anti-static).
• Commercial Sector: Shopping malls, hotels, exhibition halls, parking lots (wear-resistant and slip-resistant).
• Residential Sector: Home garages, basements, terraces (environmentally friendly and easy to clean).
• Special Scenarios: Hospitals, schools (slip-resistant and environmentally friendly), food factories (oil-resistant).
Parameters | Indicators
Main Components | Epoxy Resin/Polyurethane Resin, Colored Quartz Sand/Resin Particles, Curing Agent
Drying Time | Surface Dry ≤ 4h (25℃), Complete Dry ≤ 24h
Tensile Strength | ≥ 2.0MPa (GB/T2567)
Compressive Strength | ≥ 70MPa (GB/T17671)
Hardness | ≥ Shore D83 (GB/T2411)
Impact Resistance | No cracks or peeling after a 1m free drop of a 1000g steel ball (GB/T1732)
Water Resistance | No blistering or peeling after 168h immersion (GB/T9274)
• Environmental Standard: GB18582-2020 "Limits of Hazardous Substances in Building Wall Coatings".
• Performance Standards: GB/T22374-2018 "Floor Coating Materials", JC/T2570-2020 "Colored Sand Flooring Materials".
• Safety Standards: HJ2537-2025 "Technical Requirements for Environmental Labeling Products - Architectural Coatings".
• Stamped Sand Type (Y-type): 3-5 kg/m² (thickness 3-6 mm).
• Self-Leveling Type (SL-type): 1.5-2.0 kg/m² (thickness 0.8-3 mm). Actual usage will be adjusted based on the flatness of the floor and the construction process.
VII. Color Selection
Standard Color Chart: Provides 30+ standard colors, including beige, sesame gray, sea gray, sky blue, etc. Customization Service: Supports computer color matching; special colors can be customized according to design requirements, color difference ΔE ≤ 2.0 (GB/T1766).
Two-component packaging: Main agent 20kg/barrel + Hardener 5kg/barrel (ratio 4:1). Single-component packaging: 20kg/barrel (Yongrong 20L blue, dark green, and black packaging barrels shown).
IX. Product Storage
Storage conditions: Cool, dry place, temperature 5-35℃, avoid direct sunlight. Shelf life: 12 months (solvent-based), 24 months (water-based) in unopened condition.
1. Substrate requirements: The ground should be flat, dry (moisture content ≤8%), free of hollow areas and oil stains, with a pH value ≤10.
2. Treatment steps:
○ Grind the ground to remove laitance and oil stains (using a dust-free grinder or shot blasting machine);
○ Repair potholes and cracks (using epoxy mortar or putty);
○ Apply a sealing primer (to enhance adhesion, dosage 0.1-0.2kg/㎡).
• Sand-pressed Type (Y-type): Sealing primer (0.1-0.2 kg/m²) + Epoxy mortar layer (1-2 mm, 1.5-3.0 kg/m²) + Colored sand layer (3-5 kg/m²) + Transparent topcoat (0.2-0.3 kg/m²).
• Self-leveling Type (SL-type): Sealing primer (0.1-0.2 kg/m²) + Epoxy self-leveling intermediate coat (0.8-1.2 kg/m²) + Colored sand self-leveling topcoat (1.5-2.0 kg/m²).
XII. Construction Guide (Usage Method)
1. Construction Tools: Trowel, defoaming roller, mixer, grinder, vacuum cleaner.
2. Construction Steps:
○ Mix the two-component products according to the specified ratio and use within 30 minutes after thorough mixing.
○ Sand-pressed type: Spread the Yongrong colored sand floor paint layer using a paver and compact it smoothly with a power trowel.
○ Self-leveling type: Spread it with a trowel and defoam with a defoaming roller.
○ Topcoat application: Apply a transparent topcoat by roller or spray to enhance wear resistance.
1. Construction Environment: Temperature 5-35℃, humidity ≤85%. Avoid construction in rainy weather or under direct sunlight.
2. Material Mixing: Strictly mix according to the specified ratio and stir thoroughly to avoid incomplete curing.
3. Finished Product Protection: After construction, allow for ventilation and drying. Do not allow heavy objects to roll over the product for 7 days.
XIV. Tools Used
• Essential Tools: Trowel, defoaming roller, mixer, grinder, vacuum cleaner, hygrometer, thermometer.
• Auxiliary Tools: Masking tape, measuring cup, steel tape measure, level.
1. Protective Measures: Wear masks, gloves, and goggles during construction, and ensure good ventilation; keep solvent-based products away from fire sources.
2. Waste Disposal: Residual paint and packaging containers should be properly recycled and not discarded indiscriminately.
3. Emergency Treatment: If splashed into eyes, immediately rinse with clean water and seek medical attention; wash skin with soap after contact.
Note: The performance and application data of Yongrong Colored Sand Floor Coating listed above were obtained under specific experimental conditions. However, actual application environments vary widely and are not subject to our constraints. If you have any questions, please contact Guangdong Yongrong New Building Materials Co., Ltd. We reserve the right to revise the product manual without further notice.
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
RELATED PRODUCTS
